95937 BY PASS MODULE
$50.0095937 BY-PASS MODULE THIS UNIT IS USED IN ANY NEW VEHICLE WERE A VEHICLE HAS AN IGNITION SECURITY SYSTEM. (IT WILL REQUIRE A SPARE OR EXTRA KEY)
Showing 121–132 of 443 results
-
-
98004 200LB LINEAR ACTUATOR WITH 4-INCH STROKE 12-3/4 INCHES AND A EXTENDED LENGTH OF 16-3/4 INCHES
$260.0098004 200LB LINEAR ACTUATOR WITH 4-INCH STROKE 12-3/4 INCHES AND A EXTENDED LENGTH OF 16-3/4 INCHES
-
98006 200LB LINEAR ACTUATOR WITH 6-INCH STROKE 14-3/4 INCHES AND A EXTENDED LENGTH OF 18-3/4 INCHES
$260.00Heavy duty industrial actuator provides over 200lbs. of lifting force at the push of a button. This compact unit needs only a 2-inch square area for mounting, and will provide years of relaible service. The unit has a closed length of 14-3/4 inches and an extended length of 18-3/4 inches. The actuator utilizes clevis style…
-
98008 200LB LINEAR ACTUATOR WITH 8-INCH STROKE 16-3/4 INCHES AND A EXTENDED LENGTH OF 24-3/4 INCHES
$260.00Heavy duty industrial actuator provides over 200lbs. of lifting force at the push of a button. This compact unit needs only a 2-inch square area for mounting, and will provide years of relaible service. The unit has a closed length of 16-3/4 inches and an extended length of 24-3/4 inches. The actuator utilizes clevis style…
-
98012 200LB LINEAR ACTUATOR WITH 12-INCH STROKE
$275.00Heavy duty industrial actuator provides over 200lbs. of lifting force at the push of a button. This compact unit needs only a 2-inch square area for mounting, and will provide years of relaible service. The unit has a closed length of 20-3/4 inches and an extended length of 32-3/4 inches. The actuator utilizes clevis style…
-
98015 CLEVIS MOUNTING BRACKET FOR EXTERNAL MOTOR STYLE ACTUATORS
$50.00Our 98015 is a clevis style bracket used to attach our 98200 series actuators. The bracket comes with a 5/16 inch quick disconnect clevis pin.
-
98135 BILLET LINEAR ACTUATOR BRACKET
$92.0098135 BILLET LINEAR ACTUATOR BRACKET. THIS IS A STRAIGHT MOUNTED BRACKET FOR LINEAR ACTUATOR.
-
98136 BILLET 90-DEGREE ANGLE MOUNT BRACKET FOR 98000 SERIES LINEAR ACTUATORS WITH INTERNAL MOTORS
$92.00Billet Aluminum 90-degree angle mount bracket designed to fit our 98000 series linear actuators. This bracket provides a 90-degree mounting, which works great when attaching actuators to frame rails. This bracket will not work with the 98200 external motor actuators.
-
98152
$118.00TALEGATOR EMERGENCY ENTRY KIT THIS KIT WAS DESIGNED TO OPEN THE TONNEAU COVER IN THE CASE OF AN EMERGENCY. IT USES A CABLE TO ATTACH TO A PIN THAT HOLDS THE ACTUATOR IN ITS PLACE.
-
98160
$172.0098160 TAILGATE ACTUATOR MOUNTING KIT THIS KIT IS DESIGNED TO ADD A LINEAR ACTUATOR TO ANY THING THAT WILL NEED TO BE PUSHED AND PULLED OPEN AND CLOSED. EXAMPLE: TAILGATE ON PICKUP
-
98164 UNIVERSAL SWITCH AND HARNESS FOR OPERATING LINEAR ACTUATORS
$118.00The Universal Switch And Harness can be used to operate any reverse polarity type motor with a draw of less than 30-amps.
-
98170 SPLIT COLLAR STOP
$37.0098170 LINEAR ACTUATOR SPLIT COLLAR STOP. THIS IS A STOP FOR A LINEAR ACTUATOR WHICH WILL ALLOW YOU TO MAKE KEY ADJUSTMENT TO THE STROKE OF YOUR LINEAR ACTUATOR. THIS UNIT FITS A 3/4 INCH SHAFT.